Skip to content
Meister Boutique Plus

Installation

How to Install MEISTER Laminate Flooring

Preparation, underlay, click system, joints and essential checks for understanding a correct installation of MEISTER laminate flooring.

A good laminate can perform badly if the installation starts badly. Before the first click, the subfloor, moisture and underlay matter as much as the plank itself.

What should you do before opening the first box?

Installation must always follow the instructions of the specific collection. MEISTER uses different click systems depending on the range, among them 5G™ Dry™ and Multiclic. It is not advisable to automatically transfer the procedure of one collection to another.

Why does the subfloor rule?

Check that the surface is suitable, stable, clean, dry and sufficiently flat. On mineral subfloors, a moisture barrier or an underlay that includes one may be needed. Fixing unevenness or moisture after installing is much harder than doing it before.

What is the underlay for?

If the product does not include factory insulation, use an underlay that is compatible with the system and with the product’s requirements. The underlay can affect acoustics, stability, protection against moisture and behaviour over underfloor heating.

How do floating installation and the click system work?

MEISTER laminate is usually installed as a floating floor: the flooring is not glued to the subfloor. The click system joins the planks to each other. 5G™ Dry™ works by folding down and is designed for a secure, water-resistant lock in the collections that include it; Multiclic uses an insertion system and, depending on the situation, support with an impact block.

Which gaps should you leave at perimeters, doors and fixed elements?

A floating floor needs to respect the distances and expansion gaps specified by MEISTER. Do not block the natural movement of the floor with fixed elements. Plan junctions with door frames, pillars, other rooms and profiles in advance.

And if there is underfloor heating?

Check the compatibility of the product and the complete system. MEISTER’s instructions set temperature conditions and, in its laminate instructions, state that the surface temperature must not permanently exceed 29 °C.

Which mistakes would we avoid?

Starting without checking the subfloor, choosing an underlay at random, ignoring the expansion gaps, hitting the plank directly, locking the floor under fixed elements or assuming that all collections are installed the same way.

You choose the floor. We take care of the rest.

Fixed price. We leave it fully installed.

Personal attention

Would you rather we call you?

Leave us your phone number and tell us directly which floor or solution you are looking for.

We will only use your data to handle this request.

WhatsApp

Write to us on WhatsApp

Leave your name and phone number so we can help you better, and we will open the chat.

We will only use your data to handle this request.